Ip Camera Tools For Mac

Foscam IP Camera tool known as Equipment Search tool is a software that allows you to find the IP address of a Foscam camera on your local network. Also you can modify various network settings of Foscam cameras such as change the IP address, modify the gateway, the subnet mask, the DNS, http ports etc. You definitely need this tool in order to set up your Foscam camera.
There are a few versions of Foscam IP camera tool (also known as Equipment Search Tool), usually the main one works for all types of CCTV IP cameras and Equipment manufactured by Foscam. However they have a few versions for some of their special cameras. Below you can download the Foscam IP Camera tool.

Windows/ Mac: Storage and Network Calculator: Caculate storage and bandwidth: CalculatorV1.0.1.2181101: Platinum Series: Windows/ Mac: Codec for Media Player: Codec for Windows Media Player: Platinum Series: Download: Web Component for IP Camera (Mac) Web component for Safari (up to version 11) IPCMacV11: Platinum Series: Download: Web. Device Config Tool for GW45/55/85 series (Mac OS) Device Manager for GW30/0 series Windows Ver. Device Manager for GW30/0 series Mac OSX Ver. IPC Batch Test Tool for GW52 series camera: GW IPCManager for GW27, 57, 87 series camera – All Version: Video Player for GW27, 57, 87 series camera – All Version: Search tool for. Blue Iris (Security and Webcam Software) Blue Iris is a CCTV video security program that gives you. IP Wizard III v2.0.3 for Windows OS. Wireless IP camera (Tropox) Search Tool software. Search Tool for Windows OS. Search Tool for MAC OS. ONVIF Device Manager. ONVIF Device Manager. General management software for ONVIF IP cameras. Project's website. Virtual Machine Software for MAC. Internet Explorer 10 for virtual appliances. IP Cam Viewer Pro. Free Version Available. CD Installation Software (Search Tool/IP Camera Tools) SearchTool (Used for all camera models and Foscam NVRs) For Windows: Search Tool PC. For Mac - (FI9821W, FI8910W, etc.): Search Tool Mac. IP Camera Tool (Used for all camera models).Depreciated. For Windows: IP Camera Tool PC.

  • Equipment Search Tool V1.0.0.4 for Windows (or google drive).
  • Equipment Search Tool V0.0.0.4 for Mac (or google drive) (or google drive).
  • Equipment Search Tool for FI86XX model cameras – Windows only (or google drive).
  • Equipment Search Tool for FN7104W model cameras – Windows only (or google drive).

How to find out the IP address of your Foscam camera?

  1. Connect the camera via an Ethernet cable to a LAN port on the router.
  2. Power on the Foscam camera.
  3. Verify the computer is connected to the same router.
  4. Standby until the camera completes the self-test. Some models with the voice feature will announce “Wired connection successful.”
  5. Launch the IP Camera Equipment Search tool program.
  6. You should be able to see the camera listed on the IP camera tool software

The tool will scan your local network and will list any Foscam devices (IP camera, NVR) found on the network. Right click over the IP address of the camera and the submenu will show up. You can modify the IP address to match that of your network, gateway, subnet mask, etc.
If you double click the IP address, it will be directed to the web browser where you can access the camera using your username and password. Make sure to install any plugins that the camera prompts.

Equipment Search Tool can’t find the Foscam camera

It may happen that the Foscam IP camera tool won’t detect any IP cameras on the network (although you have connected one). There are many factors that can cause this issue, but the main culprits are various drivers installed in your computer. If you can’t find the Foscam camera on the software, read the tips below:

  1. Make sure both camera and computer are connected to the same router (network).
  2. Make sure the camera’s status is normal.
  3. Try another Ethernet cable or hook into another LAN port on the router.
  4. Make sure the router DHCP server is enabled and there is no Mac address filter.
  5. Login router’s web page, and check router’s DHCP client list as well, to see if the camera’s IP shows up there. If yes, please try to log in the camera directly by typing the IP address and port on the url address bar. (Default http port: for SD camera is 80, for HD camera is 88).

Other possible reasons the IP Search Tool may be blocked are Windows firewall settings, router firewall settings, anti-virus software or some other software issue.

”Subnet doesn’t match” error on IP camera tool

In a few cases while using the Equipment Search Tool newly discovered Foscam cameras will generate an error message subnet doesn’t match. This error is normally generated because the camera and computer do not have an IP address on the same network segment. This can be caused by the computer and camera not being connected to the same router or the camera was configured with a different IP address on another router.
Read these tips for a possible solution:

  1. Verify that the camera and computer are connected to the same router and the router’s DHCP server is enabled.
  2. You may need to perform a hard reset of the camera. Once completed the camera will obtain a new IP address from the router’s DHCP server automatically.
  3. If the above steps do not resolve the error assign an IP address for the camera manually.
  4. Verify that the Gateway and DNS server is the router’s local IP address and the camera’s IP address should have the first three numbers as the router’s IP address. Example: If the router’s local IP address is 192.168.1.1 then the IP address range of the camera would be 192.168.1.x with x being between 2 – 254. Also the IP address for the camera must be unique (not the same IP for two devices on the network).
  5. Enter the username and password for the camera and click okay. At this point the error message should be corrected and the camera should be displayed with the IP address you just assigned to it.
Disclosure:Some of the links in this post are Amazon affiliate links. This means if you click on the link and purchase any item, we will receive an affiliate commission at no extra cost to you. Thanks for your support!

If you have some recording device like security cameras and camcorders installed, then you will need a software that will be able to capture the images that are recorded by the device and display it. This can be done using certain home security software or IP camera viewer software. There are much free security camera software that can be used for free and these best security camera software will have many features.

Related:

Ip Camera Tools For Mac

Active Webcam

Best Ip Camera Software Mac

This premium software by PY Software can be used to capture images from any video device like webcams, TV-boards, camcorders, and IP cameras. It will be able to record and broadcast the videos simultaneously.

Argus DVR Software

This premium software created by Argus Surveillance Inc. will be able to provide scheduled and continuous video recording that can be triggered even by motion detection and monitored onsite or on the internet.

iSpy

This freeware and open source software by DeveloperInABox.com is a video surveillance and security software that will work with many cameras and devices for capturing videos of high quality.

Ip camera viewer mac

Webcam XP

Yawcam

Sighthound

Tincam

TeboCam

Genius Vision NVR CmE

What Is A Ip Camera Software

Ivideon Server

Zone Minder

Xeoma

Other File Transfer Software for Different Platforms

Sometimes you will be able to find certain file transfer software online that can be used on a particular operating system. These software can be used on the OS that it was designed for like Windows, Mac, Linux or Android and it will not function on any other operating system.

EyeLine Video Surveillance Software for Windows

Free

This premium software by NCH Software is compatible with the Windows platform and can be used to monitor and record more than 100 cameras simultaneously and the footage can be watched in real time.

IP Camera Viewer 2 for Mac

This freeware created by DComplex LLC can be used on the Mac platform to monitor and record videos from IP cameras. Recording can be done on schedules and on events like motion and face detection.

AtHome Camera – Home Security for Android

This free Android app can be used to monitor the home security cameras so that all the cameras can be synced to one place and the videos can be watched in real-time.

Blue Iris – Most Popular Software

This premium software manufactured by Perspective Software is very popular as it can be used to watch anything and record videos on motion detection, audio detection or continuous recording.

How to Install Security Camera Software?

Best Ip Camera Software

Some of the security camera software that is available online can be used for free while others should be purchased from the manufacturer. The first thing that you should do is check the system requirements to make sure that all the requirements like memory, operating system, and GUI needs are fulfilled so that the software will function on the system. The free software can be downloaded directly while the premium version should be purchased. The file has to be unzipped and the installation can be run to save the software to the desired location and then the language preferences can be set. You can also see IP Camera Viewer Software.

You will be able to use this software to capture videos from webcams, network IP cams, Analog cards, Camcorders and much more. JPEG’S and snapshots can be obtained and text or graphics can be overlaid on the captured videos before it could be posted online or shared.

Free Windows Ip Camera Software

Related Posts